Monday 4th 2024f November 2024 Search   Page map   E-mail   Privacy policy   Privacy policy    |             
    About us      GROUND ROCKETS      PORTABLE COMPRESSORS      References      Contact      Contact   
Musisz uaktualnić Flash Player'a
FIber optic installation

During the training of the new users from TAL-BUD company, we was installing fiber diameter 10 mm in HDPE pipe diameter 40 mm. Localization: near Gdansk, Poland.

ilustracja

On the illustration below, we can see route of the installation.

ilustracja

The set TYPHOON head and MULTITANK feeder was used.

ilustracja

The MULTITANK feeder can work with all diameters and types of fiber optics. The heads series TYPHOON can install fiber optics in plastic pipes diameter 7 - 16 mm, and HDPE pipes diameter 25 mm, 32 mm, 40 mm, 50 mm, 63 mm.

ilustracja

Our MULTITANK feeder is the only one device on the market, that has a system of full controlof parameters during fiber optics installation and protection the fiber optics against damage / breaking.

ilustracja

Before starting the installation, we can check the maximum feeding force for the fiber optics cable, depending on the diameter and quality of fiber optics. Then we can set this value on the MULTITANK Control Panel. As a result we can be sure that our fiber optic cable will not damage / break during installation.

ilustracja

During all proces of installation, we can observe and control the cable feeding force. It allow us to see the effects of increasing length of installed fiber cable and possible obstacles along the route. With this information we can adjust the installation parameters to the conditions changing during installation.

ilustracja

Also we can see the length of installed fiber optic cable. We can program the length, after which the feeder will turn off.

ilustracja

ilustracja

BACK

 
 Contact

TERMA Sp. z o.o.
Czaple 100
80-298 Gdańsk
 mole@termamax.com

ilustracja

CONTACT IN
ENGLISH:
 +48 607 451 268

CONTACT IN
RUSSIAN:
 +48 607 451 268

CONTACT IN
SPAIN:
+48 607 451 099


ilustracja
MAX K130S WON THE RODEO 2012
FIRST INTERNATIONAL TRENCHLESS TECHNOLOGY COMPETITION
 


ilustracja
MAX K95S HAS BEEN AWARDED
EXPERT 2012
during THE INTERNATIONAL NO-DIG CONFERENCE


ilustracja

MAX K55
HAS BEEN AWARDED
EXPERT 2014
during THE INTERNATIONAL NO-DIG CONFERENCE
 
 

To the top page    
About us  |  GROUND ROCKETS  |  PORTABLE COMPRESSORS  |  References  |  Contact  |  Contact
Technologie bezwykopowe - oferujemy urządzenia pneumatyczne i udarowe typu kret. Maszyny przeciskowe, krety, młoty, przeciski, przebijaki pneumatyczne.
Przecisk, maszyna przeciskowa, rakieta - wbijanie rur, przewierty, wciąganie rur.